02.03.2005 17:12:06Не устанавливается CryptoPro CSP-Solaris Ответов: 2
Vlad Ryabyshkin
Доброго времени суток!
Сабж, собственно.. Пытаюсь установить КриптоПро CSP-Solaris на Solaris 9.

Ниже сообщения, которые выдает setup.sh:
bash-2.05# ./setup.sh
Verifying CPROcp2x.tar.gz...
File ’CPROcp2x.tar.gz’ has been verified
Unpacking CPROcp2x.tar.gz...
Verifying CPROcplx.tar.gz...
File ’CPROcplx.tar.gz’ has been verified
Unpacking CPROcplx.tar.gz...
Verifying CPROcspx.tar.gz...
File ’CPROcspx.tar.gz’ has been verified
Unpacking CPROcspx.tar.gz...
Verifying CPROdrvdx.tar.gz...
File ’CPROdrvdx.tar.gz’ has been verified
Unpacking CPROdrvdx.tar.gz...
Verifying CPROdrvx.tar.gz...
File ’CPROdrvx.tar.gz’ has been verified
Unpacking CPROdrvx.tar.gz...
Verifying CPROp11x.tar.gz...
File ’CPROp11x.tar.gz’ has been verified
Unpacking CPROp11x.tar.gz...
Verifying CPROrdrx.tar.gz...
File ’CPROrdrx.tar.gz’ has been verified
Unpacking CPROrdrx.tar.gz...
Installing CPROrdrx...
WARNING:
The <CPROrdr> package "Crypto Pro readers" is a
prerequisite package and should be installed.

Installation of <CPROrdrx> was suspended (interaction required).
No changes were made to the system.
./setup.sh: /etc/init.d/cpcsp: not found
Installing CPROcp2x...
WARNING:
The <CPROrdrx> package "CryptoPro base" is a
prerequisite package and should be installed.

Installation of <CPROcp2x> was suspended (interaction required).
No changes were made to the system.
./setup.sh: /etc/init.d/cpcsp: not found
Installing CPROcspx...
WARNING:
The <CPROrdrx> package "CryptoPro base" is a
prerequisite package and should be installed.

Installation of <CPROcspx> was suspended (interaction required).
No changes were made to the system.
./setup.sh: /etc/init.d/cpcsp: not found
Installing CPROdrvx...
WARNING:
The <CPROcspx> package "Crypto Pro base" is a
prerequisite package and should be installed.
WARNING:
The <CPROdrv> package "Crypto Pro driver" is a
prerequisite package and should be installed.

Installation of <CPROdrvx> was suspended (interaction required).
No changes were made to the system.
./setup.sh: /etc/init.d/cpcsp: not found
Installing CPROdrvdx...
WARNING:
The <CPROdrvd> package "Crypto Pro driver development
64-bit" is a prerequisite package and should be
installed.
WARNING:
The <CPROdrvx> package "Crypto Pro driver 64-bit" is a
prerequisite package and should be installed.

Installation of <CPROdrvdx> was suspended (interaction required).
No changes were made to the system.
./setup.sh: /etc/init.d/cpcsp: not found
Installing CPROcplx...

This appears to be an attempt to install the same architecture and
version of a package which is already installed. This installation
will attempt to overwrite this package.


Installation of <CPROcplx> was successful.
./setup.sh: /etc/init.d/cpcsp: not found
Installing CPROp11x...
WARNING:
The <CPROp11> package "Crypto Pro PKCS#11." is a
prerequisite package and should be installed.

Installation of <CPROp11x> was suspended (interaction required).
No changes were made to the system.
./setup.sh: /etc/init.d/cpcsp: not found

Что-то можно сделать? Попытаться установить библиотеки и файлы вручную?
Спасибо!
 
Ответы:
03.03.2005 14:38:11Pooh
Вы устанавливаете 64битные пакеты.
Необходимо установить по крайней мере 32битный пакет CPROrdr. Либо руками, либо весь 32битный дистрибутив скриптом.
03.03.2005 19:51:10Vlad
Спасибо!
После setup.sh из папки 32-бита, setup.sh 64-битный скрипт setup прошел гладко.